Division 03 · Earthworks

Site cuts, trenches & soil removal.

Tight-access mini excavators (1.7t and 3t) for residential blocks. Set-out, cut to level, trench, load out. And the spoil leaves with us.

What we cover

The dirt work behind every other trade.

Earthworks is the part no-one sees once the slab goes down. But get it wrong and the slab tells on you.

  • Site cuts to the right level for the next stage. Pad, ramp, fall. Set out and cut with the slab or build in mind.
  • Trenching for plumbing, electrical and stormwater. Clean, square, depth-checked. Backfill included.
  • Spoil removal. Tip fees included in the quote. We load, we tip, no extras at the end.
  • Tight access work. 1.7t and 3t machines for sites with a 1m side gate. Hand work where the gate is narrower.
Mickleham · Site cut + prep
Specific pages

The earthworks jobs we run most often.

Pick the closest one to your job. Or call and we'll talk you through it.

How we work

Four steps. Less mess than you'd expect.

/ 01

Site photos + access

Tell us the side-gate width. That's usually what decides the machine size.

/ 02

Written quote

Cut metres, trench metres, tipper loads. Itemised. Tip fees included.

/ 03

Set out and dig

Levels confirmed, lines pegged, machine on site. Most residential cuts finish in a day.

/ 04

Spoil out, site swept

Tipper away, hand-shovel finish, broom-clean before we leave.

Earthworks quote

Send the access photos. We'll size the machine.

A few photos of the side gate and the site is usually enough.